12V 6x3W ایل ای ڈی یاٹ لائٹ پانی کے نیچے ہل پر نصب کرنے کے لیے
Comlite manufactures LED marine lights for leisure boats, yachts and commercial vessels. The range covers thru-hull underwater lights, surface mount deck and transom lights, mast and flood lights, and the controllers that drive RGB installations — built for 12V and 24V marine systems and for continuous contact with saltwater.
Marine lighting splits on one question: is the fitting above or below the waterline? Below-water fittings have to hold a seal against constant immersion and hull flex, so housing material and cable entry matter more than output. Above-water fittings are judged on beam pattern and glare. Choose the mounting first, then the voltage, then the beam.
Quick Selection Guide
By mounting:thru-hull underwater lights sit flush with the hull and light the water below; surface mount lights screw onto transoms, decks and hardtops.
By voltage:most leisure boats run 12V DC; larger yachts and workboats run 24V. Check the system before specifying.
By material: 316L stainless steel for anything below the waterline or in constant spray. Lower grades pit in chloride-rich water.
By function:underwater lights for night fishing and dockside ambience, flood and mast lights for working decks, RGB sets for entertainment lighting.
1.سٹین لیس اسٹیل 316 ہاؤسنگ 2.IP68,CE Rohs 3.آسانی سے انسٹال کیا گیا 4.CREE چپ
ایل ای ڈی میرین لائٹس: کمپلیٹ اسپیسفیکیشن گائیڈ
کوملائٹ جہازوں اور واٹر فرنٹ ڈھانچوں کے لیے ایل ای ڈی میرین لائٹس تیار کرتا ہے: زیر آب کشتی اور یاٹ لائٹس, سطح پر نصب میرین لائٹس, اور میرین فلڈ اینڈ ڈیک لائٹس. اس رینج کے ہر ماڈل کو نمکین پانی کے مسلسل سامنے آنے کے لیے بنایا گیا ہے, IP68 سیلنگ استعمال کرتے ہوئے, 316ایل ایل ایس سٹین لیس ہاؤسنگ اور میرین گریڈ کیبل گلینڈز.
سالٹ واٹر واٹر سب سے سخت ماحول ہے جس سے ایل ای ڈی فکسچر ملتا ہے. کلورائیڈ دھات پر حملہ کرتا ہے, UV پولیمرز کو خراب کرتا ہے, اور ہر سیل پر ویو ایکشن دباؤ کو سائیکل کرتا ہے. یہ صفحہ وضاحت کرتا ہے کہ کشتی کے لیے میرین لائٹنگ خریدتے وقت کیا بتانا ہے — اور کن چیزوں سے بچنا چاہیے, یاٹ یا واٹر فرنٹ انسٹالیشن کے دوران.
پانی کے نیچے کشتی کی لائٹس: ٹرانسم بمقابلہ تھرو-ہل
ٹرانسم / سطح پر نصب
ہل کے باہر پانی کی لائن کے اوپر یا فوراً نیچے نصب, ٹرانسم لائٹس کے لیے پانی کی لائن کے نیچے سوراخ کرنے کی ضرورت نہیں. تنصیب آسان ہے اور فٹنگ کو کشتی تیرتے ہوئے تبدیل کیا جا سکتا ہے. لائٹ کا پھیلاؤ وسیع مگر کم گہرا ہے. یہ زیادہ تر ریٹروفٹ پروجیکٹس اور اُن مالکوں کے لیے صحیح انتخاب ہے جو کشتی کو خشکی پر نہیں لانا چاہتے. سطح پر نصب سمندری لائٹس دیکھیں.
12V 6x3W ایل ای ڈی یاٹ لائٹ پانی کے نیچے ہل پر نصب کرنے کے لیے
تھرو-ہل
تھرو-ہل لائٹس ہل سے گزرتی ہیں تاکہ لینس فلیش ہو, صاف ہائیڈروڈائنامک پروفائل فراہم کرتا ہے اور گہرا, زیادہ برابر پانی کے نیچے کوریج دیتا ہے. ان کے لیے پانی کی لائن کے نیچے سوراخ اور مناسب بیڈنگ کی ضرورت ہوتی ہے, لہذا تنصیب پیشہ ورانہ کام ہے — عام طور پر خشکی پر لانے کے ساتھ شیڈول کی جاتی ہے. See underwater boat and yacht lights.
Marine Flood and Deck Lights
Not every light on a boat goes underwater. Deck and flood lights handle working tasks: loading gear, cleaning the catch, navigating the deck at night, and lighting a working area on a commercial vessel. These are mounted above the waterline where IP65 or IP66 is usually sufficient — but on a saltwater boat, corrosion resistance still matters as much as the ingress rating. See marine flood and deck lights.
Cree 2x9W surface mount marine LED light for decks and transoms
What Makes a Light "Marine Grade"
The term is used loosely across the industry. These are the four things actually worth checking:
Ingress protection.IP68 for anything permanently submerged; IP65-IP66 is acceptable for above-waterline deck and flood lights.
Housing material. 316L stainless steel or marine-grade bronze for submerged fittings. 304 stainless will stain and pit; aluminium will corrode in saltwater unless specially treated.
Cable entry.A moulded, potted gland rather than a compression grommet. The cable entry is where most marine lights fail, not the lens.
UV and corrosion testing.Ask whether the housing and lens were tested under UV exposure and salt spray, not just submerged in fresh water on a bench.
Comlite builds this range in 316L stainless steel with anti-UV and anti-corrosion testing in seawater conditions. Test reports covering UV exposure and salt spray corrosion can be supplied with your quotation.
وولٹیج: 12V and 24V Marine Systems
Most leisure boats and small commercial vessels run 12V DC. Larger yachts and workboats commonly run 24V DC. Our marine range covers both, and several models accept a wide 12V-24V input so the same part number serves either system.
Two sizing notes. First, total the wattage of all lights on a circuit and check it against your battery capacity and charge source — a bank of high-output underwater lights is a significant overnight load. Second, use tinned copper marine cable and adequately rated fusing; voltage drop over a long run to the transom is a common cause of lights that appear dim or flicker.
Applications
Underwater Transom Lighting on Yachts
Usually a pair or a spread of blue or white lights across the transom, both for aesthetics at anchor and for attracting bait at night. RGBW models allow colour changes from the helm.
Cree 1x9W LED breakwater light for yacht hulls
Fishing Boats and Workboats
Here the priority is output, durability and serviceability rather than appearance. Green underwater lights for bait attraction, plus high-output deck lighting for working after dark.
Docks, Marinas and Waterfront Structures
Fixed installations on piles and pontoons. Because these lights cannot easily be retrieved, specify 316L stainless housings and confirm cable length before ordering.
Our Marine Lighting Range
Underwater Boat & Yacht Lights — transom and thru-hull
Our marine range is derived from the same engineering as our deep sea fishing lights, which are pressure-tested to depths far beyond anything a hull or transom fitting will meet. That means the sealing, housing and cable-entry design on a transom light has already been proven under loads it will never see — which is exactly the margin you want in a fitting you cannot easily retrieve.
316L stainless steel as standard across the marine range
Wide 12V-24V input on selected models
Anti-UV and anti-corrosion tested for seawater service
OEM and wholesale supply, with private labelling available
عمومی سوالات
Do I need a thru-hull or a transom mounted underwater light?
Transom mounted lights sit on the hull surface and do not require drilling below the waterline, so installation is simpler and the boat can stay afloat. Thru-hull lights sit flush and give deeper, more even coverage, but need a haul-out and professional bedding.
What is the difference between 304 and 316 stainless steel on a boat?
316 contains molybdenum, which significantly improves resistance to chloride pitting. In saltwater, 304 will stain and pit over time while 316L holds up. For any submerged marine fitting, specify 316L.
Can I use a normal outdoor LED flood light on a boat?
Not for submerged use, and not ideally above the waterline either. Standard outdoor fittings are not designed for salt spray or for the constant vibration of a hull, and their housings are usually aluminium or coated steel.
Do your marine lights run on 12V or 24V?
Both. Most models in our marine range accept a wide 12V-24V DC input. Check the specification of the individual model before ordering.
قیمت کا تخمینہ طلب کریں
Tell us the vessel type, hull material, system voltage and whether the fitting is above or below the waterline, and we will recommend a model list and pricing.
